Engineered wood floors make for a stunning focal point in any home and because of their affordability, elegance and strength, they are huge popular in households across the country. However, they do need to be installed and cared for properly – read on for a step by step guide to how you can get as much value as possible out of your engineered wood floors.
You’re likely to be wondering whether or not you need to fit flooring underlay before installing an engineered wood surface. The answer to this question entirely depends on which type of subfloor you are planning to use, but no matter what engineered click system product you are installing, some form of underlay must always be present, as it will support the joints of the flooring and make it last even longer.
While most wood floors are prone to shrinking and expanding following changes in the humidity or temperature of a space and need to be accompanied by a moisture-proof subfloor, this isn’t the case with engineered wood floors.
Because of the material’s unique construction, it can be fitted on top of normal underlay that you might traditionally find beneath concrete floors.
With engineered wood floors, you’ll be able to install underfloor heating, but only if you adhere to certain guidelines.
For instance, proper heat distribution layers will need to be in place so that warm temperatures – which should not rise above 27 degrees C – are spread evenly across the surface.
It’s also crucial the whole floor is heated and a vapour barrier is fitted close to the wood, while you must also make sure there are no gaps between the underlying surface and the wood. If you’re unsure about these steps, speaking to a professional at UK Flooring Direct will be able to answer your questions.
Engineered wood flooring comprises of several layers of wood stuck together using extremely high pressures, meaning it is super-strong and will be able to handle plenty of foot traffic even in the busiest of spaces like the kitchen or lounge. This makes it a solid investment, as you won’t have to worry about fitting new floors for years to come!
The topmost layer of engineered wood is the hardwood veneer, which ranges in thickness between 0.6 mm to around 6 mm. Like all other types of wood flooring, this is where the material is most durable, but the outer layers make it even stronger.
Laying the floor
Before setting down the surface, you’ll need to leave the wood out for some time to adjust to the climate of the room, as this will help you to get the most out of it for as long as possible.
The laying process is incredibly simple with engineered wood, as you are able to use the floating floor method of easy click installation, which is the fastest way of fitting it. Or, you could stick planks with tongue and groove joints together, which is a particularly good idea if you are using a concrete subfloor.
In addition, you should leave a 10 mm gap between any walls or doors to make room for a scotia, which will give the flooring a clean and stylish finish.